How to Pick the Best Replacement Headlights

Know what to look for and what to avoid when selecting new lighting.

David Gluckman | 
May 17, 2022 | 4 min read

Black car headlights in daytimeShutterstock

You may not think about them often, but your headlights are one of your car’s most important safety features, letting you see and be seen in the dark. When it comes to replacing or upgrading your bulbs, you need to know what you’re looking at.

Know the Lingo: Sealed Beam, Halogen, HID, LED, Laser

Your owner’s manual will tell you what kind of lighting system your car has along with what specific size and type of bulbs you’ll need. Keep in mind that some cars use one technology for the low-beams and another for the high-beams, sometimes with a third thrown in for the turn signals. Below is an explanation of each type:

- Sealed beam: This type of headlamp uses an incandescent bulb sealed within an assembly; the whole thing has to be replaced when the lamp dies. You won’t find sealed beams on any new vehicle, but these round or rectangular lights used to grace all U.S. models before the mid-’80s, when the government first allowed composite headlights with replaceable bulbs.
- Halogen: Very common today, these headlights use halogen gas, allowing them to burn brighter than a standard incandescent bulb.
- HID: Brighter than halogens, high-intensity discharge (aka xenon) headlights use an arc of electricity through a xenon gas-filled bulb to make light.
- LED: Light-emitting diodes are particularly power-efficient and capable of lasting the lifetime of the vehicle, in part because they create minimal heat. (That can be an issue in frosty weather, though, as snow or sleet could freeze to the headlamp unless it has auxiliary heat to prevent such vision-robbing buildup.) LED headlamps can also adapt to road conditions and avoid blinding oncoming drivers by turning on and off individual elements.
- Laser: Yep, frickin’ lasers. These diodes are similar to LEDs, allowing for advanced beam-pattern control, but they emit photons using a different process and are much brighter. 

What to Look for in a Replacement Bulb

LED and laser lights should last forever, but if a problem comes up, you’ll have to replace the entire headlamp assembly, which can cost hundreds or thousands of dollars. Replacement sealed-beam units are relatively inexpensive, around $10 to $20. They’re available with halogen bulbs or LEDs for improved visibility and longer life.

If your car has halogen or HID lights, the bulbs that came with it likely prioritize longevity over brightness. You can do better than that, and the good news is that even the nicest headlight bulbs aren’t that expensive (think $30).

All road-legal bulbs have to meet certain DOT standards for output (in lumens) and power (watts) based on their type. You’ll find standard bulbs like the ones from the factory, as well as long-life options that sacrifice output for longevity, and “high-efficacy” variants that put out more light. Things like color and color temperature are marketing distractions, and in the case of blue-tinted bulbs, they can actually increase glare and shorten bulb life unnecessarily.

We recommend sticking with name brands and going for the highest-output variant. Avoid the gimmicky colors and always replace your bulbs in pairs; it’s important that your headlamps shine evenly, and if one bulb is burnt out, the other isn’t far behind.

That Upgrade Probably Isn’t One

You may be tempted to swap to a better lighting technology, and many companies will sell you an HID “upgrade” kit for your halogen units or an LED bulb that’ll fit in a xenon light socket. We don’t recommend this route for a few reasons.

Changing the type of light source will yield poor results because the housing and its components (such as reflectors or projectors) need to be tuned for the light source. LEDs emit light in a different pattern altogether, and they can’t imitate either an HID or halogen, so the optics just won’t line up.

Occasionally folks find a way to upgrade from the standard factory halogen lamps to optional HID units, but it involves rewiring and the addition of high-voltage ballasts. In most cases, your time and money are better spent on good-quality replacement bulbs. Safety beats aesthetics every time.


Written by humans.
Edited by humans.

This site is for educational purposes only. The third parties listed are not affiliated with Capital One and are solely responsible for their opinions, products and services. Capital One does not provide, endorse or guarantee any third-party product, service, information or recommendation listed above. The information presented in this article is believed to be accurate at the time of publication, but is subject to change. The images shown are for illustration purposes only and may not be an exact representation of the product. The material provided on this site is not intended to provide legal, investment, or financial advice or to indicate the availability or suitability of any Capital One product or service to your unique circumstances. For specific advice about your unique circumstances, you may wish to consult a qualified professional.

David Gluckman

David Gluckman has over a decade of experience as a writer and editor for print and digital automotive publications. He can parallel park a school bus, has a spreadsheet listing every vehicle he’s ever tested, and once drove a Lincoln Town Car 63 mph in reverse. When David’s not searching for the perfect used car, you can find him sampling the latest gimmicky foodstuffs that America has to offer.


Shop cars